Shop

RV Parts:Home/Shop
  • ‘Atwood’ – Door Hardware Kit

    $60.00 Part no: DRV0073
    Atwood 91858 - Replacement Door Hardware Kit for Water Heater Exterior Access Hatch

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 92078 – RV Water Heater Gas Control Valve

    This is an electrically operated valve which opens to allow propane to flow into the burner chamber.  It is controlled by the water heater circuit board (not included). Fits Atwood Models: G6A-2E, G6A-3E, G6A-4E, G6A-6E, G6A-7E, G6A-8E, G610-3E, GC6A-7E, GC6AA-7E, GC6AA-8E, GC6AA-9E, GC6AA-10E, GCH6-4E, GCH6-6E, GCH6-7E, GCH6A-7E, GCH6A-8E, GCH6A-9E, GCH6A-10E, GH6-3E, GH6-4E, GH6-6E, GH6-7E, GH6-8E, GH610-3E, G9-EXT (G9EXT), GE9-EXT (GE9EXT), GEH9-EXT (GEH9EXT)   We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 91367 – Water Heater Circuit Board Kit with fuse is to be used with a gas only direct spark ignition water heater. Mounting screws included.  Also comes with Atwood 92075 – Edge/Pin Adaptor.

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 91365 - is a potted circuit board combo with fuse for Atwood water heaters.   We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 91386 - Water Heater Access Door for 6 gallon Water Heaters

    Atwood/Dometic Exterior Access Door
    Colour:  Arctic White
    Material:  Steel
    Dimensions:  18"W x 14"H x 1/4" thick

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 93105 - Water Temperature Adjuster

    • Control the water temperature of your Atwood Electronic Ignition Water Heater.
    • Adjusts from 110° to 150°.
    • All you need is a flat bladed screw driver.
    • Thermostat fits all Atwood Front Mount E.C.O. and T-Stat Gas Direct Ignition Water Heaters.
      We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • 'Atwood' - Water Heater Element (92251)

    • 220v
    • 1000w
    • Heating Element (screw-in type) to suit 6 Gallon 220v Atwood RV Water Heaters.

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 91604 - Water Heater Pressure Relief Valve - 150 PSI - 1/2" NPT Thread   We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 93868 – Water Heater Spark Probe/Igniter

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Sale!

    ‘Atwood’ – Water Heater Thermal Cut-off Fuse

    Original price was: $75.00.Current price is: $55.00. Part no: DRV0076
    Atwood 93866 – Water Heater Thermal Cut Off Fuse (single)

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 91447 - Water Heater Thermostat Assembly

    We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Extend the life of your RV's water heater with Camco's patented magnesium anode rod for aluminum water heaters (Atwood style).   We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • Atwood 91230 - Water Heater Dual Switch Panel

    • Dual Panel DSI Water Heater Switch
    • 12VDC
    • White
    Fits Atwood Models: GCH6A-10E, GC6AA-10A, GC10A-4E, GCH10A-4E   We stock the largest range of Atwood Water Heater parts in New Zealand!   If you are looking for something in particular that is not listed please Contact Us.
  • 'Autoterm' Air 2D Diesel Heater - 12v with Single Outlet Kit

    AUTOTERM Air 2D is the most compact diesel-powered air heater from Air series. The heater unit uses fresh air from outside or from a well-ventilated room, then heats it up quickly, thus providing comfort and warmth in low temperature environments. The heater’s maximum power output is 2 kW and it is capable to produce up to 86 m3 of hot air flow hourly, and maintain your desired temperature. This is a great product for those who need to additionally heat small truck cabins, commercial vehicle cabins and cargo compartments, small campers, off-highway vehicles or boats of up to 33 ft/10 m. Complete with:
    • Autoterm OLED Control Panel
    • Autoterm Mounting Plates For 2D & 4D
  • 'Autoterm' Air 4D Diesel Heater - 12v

    AUTOTERM Air 4D is one of the most popular diesel-powered air heaters from Air series. The heater unit draws fresh air from the outside or from a well-ventilated room, then heats it up quickly, thus providing comfort and warmth in low temperature environments. This is a great product for those who need to additionally heat large truck cabins, commercial vehicle cabins and cargo compartments, campers, motorhomes or boats/yachts of up to 48 ft/15 m.   N.B:  Available by order only.  Price excludes freight.
  • ‘Camco’ 10ft RV Sewer Hose Kit

    $84.00 Part no: DRV0267

    'Camco' 10ft RV Sewer Hose Kit

    The Camco Easy Slip Sewer/Waste Hose Kit is used to empty your waste tank at a dump station. With a new and improved design, this kit is made without clamps on the side. This kit has everything you need for a quick sewer hookup. It comes with a 3 metre HTS sewer hose, bayonet straight hose adapter and sewer elbow with 4-in-1 adapter. Emptying your waste tank will no longer be a stressful task that spoils your holiday, increasing the enjoyment you get out of your RV.   Benefits & Features
    • Includes: Easy slip straight hose adaptor, easy slip sewer elbow, 4-in-1 threaded adapter (Adapter fits into 3" slip or 3", 3.5" and 4" threaded pipe), 3m vinyl sewer hose
    • Simple and secure fitting
    • Non-restrictive for free flow and faster dumping
    • Patented easy slip sewer hose fittings
    • No clamps or tools needed
    • Engineering-grade resins provide strength and durability
    • Components separate for storage in bumper
    • Application: Sewage
    • Features: Corrosion resistant, lead free, removable
    • Length of hose: 3m
  • 'Camco' Bayonet Straight Sewer Hose Adapter

    Connect hose to RV.  Tapered ends accept all 3" sewer hoses.  Stores with hose in standard 4" bumper.  Camco’s patented Spin-Lock™ rings rotate directly onto sewer hose wire to create a secure, airtight seal that eliminates odours and leaks.  There’s no need for clamps or tools.  Non-restrictive, allows free flow.
  • 'Camco' Gutter Extensions (4pk)

    Gutter Extension - White, Set of 4 (2 left / 2 right) Camco RV Gutter Extensions are designed to prevent black streak formation by directing rain water away from the sides of the RV. It features an extension clip that adheres directly onto the existing RV gutters. These gutter extensions are easy to install and very effective.
    • Directs rain-water away from the sides of the RV
    • Clips to existing RV gutters (if you do not have existing gutters already - please CLICK HERE to see combination Gutter Spouts with extensions)
    • No tools needed
    • 2 left, 2 right extensions
    • Made in the USA
  • 'Camco' Gutter Spouts with Extensions - 2pk (1 left, 1 right) Camco RV Gutter Spouts w/ Extensions are designed to help prevent black streaks from forming by directing rain water runoff away from the sides of your RV. Replaces shorter or worn OEM rain spouts, or can be used on RVs that do not have existing gutters on the drip rail.   Also available in a 4pk - Please CLICK HERE
  • 'Camco' Gutter Spouts with Extensions - 4pk (2 left, 2 right) Camco RV Gutter Spouts w/ Extensions are designed to help prevent black streaks from forming by directing rain water runoff away from the sides of your RV. Replaces shorter or worn OEM rain spouts, or can be used on RVs that do not have existing gutters on the drip rail.
  • 'Camco' Slip on RV Internal Sewer Hose Coupler 3”

    • Provides an airtight odour and leak seal.
    • Tapered ends accept all 3" sewer hoses.
    • Allows for quick hose connection.
    • Unique locking ring threads directly onto hose and holds securely.
    • Stores with hose in standard 4" bumper.
  • 'Dometic' Replacement Floor Flange Seal for 300 Series Toilets

    • CompatibilityDometic 310/ 300/ 301 Model Toilets
    Replacement hardware kits also available HERE
  • 'Dometic' LS300 Fridge Vent (120L or larger)

    Refrigerator Ventilation grill for double-door models Attaches to the exterior of the vehicle. The LS 300 for double-door models can be used at the top and at the bottom.
    • Dimensions:  279H x 518W (measurements in mm)
     
  • Sale!

    ‘Dometic’ Micro Heki – Roof Vent/Sky Light – 280mm x 280mm

    Original price was: $159.00.Current price is: $145.00. Part no: DRV0050

    'Dometic' Micro Heki - Roof Window with Flyscreen

    This ultra-compact roof light/vent was specially designed for the bathroom area of motorhomes and caravans.
    • Fits into a roof opening of 280 x 280 mm and can be opened and closed with a hand-lever system.
    Micro Heki is the smallest roof light in the Dometic range.  Its features, however, leave nothing to be desired.  The elegant inner frame integrates a single pleated optional darkening blind and a fly screen, which can be adjusted separately as required.  You can play with shade and light, let fresh air in and keep insects out and your smallest room on board will always be well ventilated, dry and neat. Micro Heki comes with a double-glazed roof dome, which is tinted on the outside and opens in two steps up to a maximum angle of 50°. A special locking device keeps the opened window firmly in place.
    • Model available with inner fly screen (can be adjusted separately) and optional darkening
    • Maximum opening angle: 50° (
    • Double acrylic glazing, tinted on the outside
    • Lockable vent position
    • For roof thickness of 23–42 mm
  • Replacement flush ball seal/flush ball gasket for Dometic RV Toilets To suit Dometic 300, Dometic 310 & Dometic 320 model RV Toilets (now discontinued) Dimesions:  Outer Diameter 4"; Inner Diameter 2.75" Colour:  Black    
  • Discontinued Model!  Only 2 left in stock.  Once they're gone, they're gone!

    _________________________________________________________________________________________________________________

    Dometic Sink Drainer with Flush Glass Lid

    Rinsing, washing, disposing of waste - these simple tasks can be a drag when you're on the move.  The solution is simple - why not install a sink in your RV? The Dometic Sink Drainer with Flush Glass Lid is a practical solution to complement your mobile kitchen fittings.  Constructed from hard-wearing material, this sink and drainer is built to last.  It features a practical glass lid which is simply folded down after washing up, providing additional work space.  How convenient!
    Dimensions:  600W x 445D (mm)
    Features:
    • Elegant design
    • Heat-resistant safety glass lid
    • Siphon
    • Rubber seal
    • Integrated waste tray
    • Includes hole for tap
    • Weight: 5.1kg
    • Dimensions (W x H x D): 600 x 136 x 445mm
    • Built-in dimensions (W x D): 590 x 435mm
    Also available to purchase - fold down tap to suit.  Please CLICK HERE
  • Dometic 300 series (300, 310, 320) Toilet water valve kit.

    Genuine part. Complete with clamp, screws & instructions.
  • 'Elecbrakes' 12 pin Adapter for Electric Braking System
    • 1 x Flat 12 pin male/12 pin female (other configurations available - please contact us with your requirements)
    NB:  This adapter is to be used when replacing an existing Electric Braking system on your trailer.  IF you are installing an Elecbrakes System from scratch on a new trailer (or one that did not previously have electric brakes you need the Hard Wired Trailer Leader) Please note this price is for the Elecbrakes 12 pin Male/12 pin Female Adapter ONLY.   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • ‘Elecbrakes’ 7-12 Pin Adapter

    $119.00 Part no: DRV0195
    'Elecbrakes' 7 pin Adapter for Electric Braking System
    • 1 x Flat 7 pin male/12 Flat pin female (other configurations available - please contact us with your requirements)
    NB:  This adapter is to be used when replacing an existing Electric Braking system on your trailer.  IF you are installing an Elecbrakes System from scratch on a new trailer (or one that did not previously have electric brakes you need the Hard Wired Trailer Leader) Please note this price is for the Elecbrakes 7 pin Male/12 pin Female Adapter ONLY.   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • 'Elecbrakes' 7 pin Adapter for Electric Braking System
    • 1 x Flat 7 pin male/7 pin female (other configurations available - please contact us with your requirements)
    NB:  This adapter is to be used when replacing an existing Electric Braking system on your trailer.  IF you are installing an Elecbrakes System from scratch on a new trailer (or one that did not previously have electric brakes you need the Hard Wired Trailer Leader) Please note this price is for the Elecbrakes 7 pin Male/7 pin Female Adapter ONLY.   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • 'Elecbrakes' Electric Brake Controller for trailers, horse floats, caravans & boats. The latest innovation in the category of electric brake controllers, Elecbrakes is a remote mount electric trailer brake controller. Australian designed and assembled, the Elecbrakes system is designed to be installed on the trailer and does not require any modification of the towing vehicle!  A simple solution for any trailer that gets towed by more than one vehicle. Rated #1 Best Brake Controller in NZ by Camplify!
  • 'Elecbrakes' Electric Brake Controller for trailers, horse floats, caravans & boats. The latest innovation in the category of electric brake controllers, Elecbrakes is a remote mount electric trailer brake controller. Australian designed and assembled, the Elecbrakes system is designed to be installed on the trailer and does not require any modification of the towing vehicle!  A simple solution for any trailer that gets towed by more than one vehicle. Rated #1 Best Brake Controller in NZ by Camplify! __________________________________________________________________________________________________________________________

    BEFORE COMPLETING YOUR PURCHASE - Please note:  

    As a minimum, you will require 1 x Elecbrakes Controller and EITHER the Hardwired Trailer Leader OR an Adapter Plug (not both!!!). IF you are fitting the Elecbrakes system to an existing trailer that already has electric brakes fitted, you will require an Adapter Plug (not the hard wired trailer leader!).  IF you are fitting the Elecbrakes System to a NEW trailer, it is best to install the Hard Wired Trailer Leader (no need for an Adapter Plug!!). The Remote Control is optional (the entire system is designed to be run off an app on your smart phone!). This means that ANYONE in ANY vehicle can tow your trailer with the Elecbrakes system fitted so long as someone in the vehicle has the Elecbrakes App on their phone and it is paired to the controller on your trailer.  Too easy!
  • 'Elecbrakes' Hard Wired Trailer Leader for Electric Braking System
    • 1 x 1.5mtr leader pre-wired with matching Deutsch plug, allows leader to be internally routed through trailer chassis as required.
    NB:  This adapter is to be used when you are installing an Elecbrakes System from scratch on a new trailer or one that didn't previously have electric brakes.  IF you are replacing an existing Electric Braking system with the 'Elecbrakes' System, you will need the 'Elecbrakes' 7 Pin Adapter Plug   You will also need the Elecbrakes Controller Unit.  The Remote Control is optional.
  • 'Elecbrakes' Wireless Remote Control for Electric Braking System Elecbrakes in car remote control allows the user to control braking response, select user defined programs and activate trailer brakes only by using the manual override button. Included in the kit:
    • Remote Control
    • 12v/24v USB Charger
    • USB Cable
    For the Elecbrakes Controller CLICK HERE. The latest innovation in the category of electric brake controllers, Elecbrakes is a remote mount electric trailer brake control system. Australian designed and assembled, the Elecbrakes system is designed to be installed on the trailer and does not require any modification of the towing vehicle!  A simple solution for any trailer that gets towed by more than one vehicle. Rated #1 Best Brake Controller in NZ by Camplify!
  • 'Fiamma' Table Pole - Full Set or Individual Parts Set Includes:

    • 1 x Pole Tube - Height 700mm complete with 2 plastic joint caps (this can be cut down if needed)
    • 1 x Recessed Base
    • 1 x Conic top mount connection
    • All necessary mounting screws
    • Does NOT include the Recessed Base Plug.  This must be purchased separately.
    OR parts are available for purchase separately.  Please select the part/s you require from the drop down menu.    
  • ‘Jensen’ 14 x 14″ Roof Vent

    $149.00 Part no: DRV0273

    Jensen Roof Hatch 14" x 14"

    Features:
    • Self-centering device eliminates installation guess work and assures perfect alignment in roof opening
    • Standard radius corners
    • Screen allows air through while keeping insects out
    • Simple to install or replace any vent with a roof opening of 14" x 14"
    • Metal base with white UV resistant acrylic lid
    • Accommodates a variety of roof thicknesses
    • Suitable for roof thicknesses 25-70mm
  • 'Johnny Chock' Tank Flush Assist

    Johnny chock is patented method for flushing out your black water tank. Johnny Chock allows for the continuous flow of water to your holding tank.  When Johnny Chock is in place there is no need to hold or wedge toilet flush valve with your foot, hands or a stick.  To use, simply open flush valve with hand or foot and place Johnny Chock in toilet bowl where it will keep valve open until you remove it.
    • Inside Dimension:  2 inches
    • Outside Dimension:  2 3/8 inches.
  • We have a range of replacement parts available for Lippert Slide Outs.  If you are looking for something in particular please call Steve on 027 236 4272.

      The Lippert Range Lippert Components are the largest supplier of Slide Out Systems to the US RV Market.  Started in 1957, their longevity in the RV industry stands as a testament to the quality workmanship that goes into each kit. Slide Out Systems provide more living space to RV consumers without compromising overall size.
  • Low profile Maxxfan ventilation unit features closed-lid running capabilites, an easy to clean removable fly screen, an impressive 10 speed 12v fan motor, with manual opening.
    • Removable flyscreen – simply twist the L-clamps and remove for cleaning!
    • Installs onto all standard 14” x 14” (356mm x 356mm) roof openings
    • Powerful 10-speed fan motor
    • Fan can run even if the lid is closed (select ‘Ceiling Fan Mode’) and can be used in “intake” and “exhaust” modes
    • Provides over 900CFM, keeping your RV cool and comfortable
    • Twin lifting arms limit vibrations cause by wind when in the ‘open’ position
  • The "Maxxfan Ventilation System" is the only complete RV/Horse Float or Coach ventilation system that incorporates a vent, a fan, a remote control and rain protection all in a single unit that is robust! 
    • Been Used in the USA RV Market since 1988
  • 'MaxxAir' Standard Vent Cover (white)

    Leave your vent open rain or shine. The Maxxair vent cover offers high-flow ventilation in an aerodynamic design. Removeable louvres for easy cleaning.  Mounts to existing 14"x14" roof vents.  UV stabilized resin for years of rugged use.
  • RV ventilation has never been easier than with a MaxxFan. They’ve been used in the US RV market since 1988, and they are now exclusively available from Coast to Coast. The MaxxFan Plus is available in a manual option and an electric opening option (with remote control), and they also have a ceiling mounted control panel that is easy to use and read. Note:  This vent is the MANUAL LIFT version.  For the Power Lift Version, please CLICK HERE.
  • OUT OF STOCK - ETA Mid August '23.

    ________________________________________________________________________________________________________________________

    'Maxxfan' Plus - Vent with Thermostat, Power Lift, Rain Sensor & Remote

    RV ventilation has never been easier than with a MaxxFan.  They’ve been used in the US RV market since 1988, and they are now exclusively available from Coast to Coast.  The MaxxFan Plus and the MaxxFan Deluxe, both have a manual option and an electric opening option, and they also have a ceiling mounted control panel that is easy to use and read. These vents fit all standard 14" x 14" roof openings.
  • RecPro Magnetic Baggage/Locker/Compartment Door Catch

    Keeps storage compartment doors open for loading and unloading. Colour:  Black Price is for a SINGLE set (2pcs)  
  • 'Sphere' W.A.S 1 Gang Wireless Light Switch

    Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features:
    • Comes with 2 x CR2032 lithium batteries
    • Easy installation - no drilling
    • No wires, saving on wire costs
    • Long lasting battery operation
    • Surface mounting
    Specifications: Switch backing is 120mm x 80mm Single light switch Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features: Comes with 2 x CR2032 lithium batteries Easy installation - no drilling No wires, saving on wire costs Long lasting battery operation Surface mounting Specifications: Switch backing is 120mm x 80mm Two light switch Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features: Comes with 2 x CR2032 lithium batteries Easy installation – no drilling No wires, saving on wire costs Long lasting battery operation Surface mounting Specifications: Switch backing is 120mm x 80mm Single light switch with master off Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • 'Sphere' W.A.S 3 Gang Wireless Light Switch

    Easily installed on any flat surface, the Sphere Wireless Lighting Control System requires no drilling, no wires, and no hassle. Simply pair the wireless switch with the 6 Channel Receiver (sold separately). Product Features: Comes with 2 x CR2032 lithium batteries Easy installation – no drilling No wires, saving on wire costs Long lasting battery operation Surface mounting Specifications: Switch backing is 120mm x 80mm Three light switch Description Place your light switch where ever you want, without having to run wires inside your walls. For use with the Sphere Wireless Lighting Control System. The switches get fixed to any wall, cupboard or ceiling without the need to connect to your RV 12v wire system. The companion receiver (separate part) can handle up to six different lights, gets the message to switch the light on or off. There are multiple switch combinations available from one to six zones, some also include a master switch that will switch all zones off at once. You get the most flexibility by getting a number of switches that are located exactly where you want. Beside the bed, near the table, near a door or even on a sliding door where a normal switch cannot be placed. The receiver is the only part that needs to be connected to the lights. There is also a remote control (separate part) that can be used. The savings in installation time, wire cost, and finding wiring failures in the future are all good reasons to go this way. These are now used in many Jayco caravans during manufacture and have proved reliable and convenient.
  • 'Suburban' 20.3L Water Heater (GAS Only w/12v Ignition) - Model SW6DRA

    What's Included:
    • 1 x Suburban SW6DRA Gas Only Hot Water System (NZ Model to comply with gas regulations)
    • 1 x 12v ignition switch
    • 1 x External Door
  • 'Suburban' Hot Water Heater - Gas & 240V Electric (SW6DERA)

    This Suburban operates on LPG gas & 240V and has a 12V ignitor. Specifications:
    • Capacity: 20.3L
    • Max working pressure: 700Kpa
    • Hourly gas consumption: 8.7mj/hour
    • Test point pressure: 2.63Kpa
    • Jet orifice size: 0.84mm
    • Type of heating medium:  Universal Gas/240V
    • Recovery: 40Lt/hr. 45C rise
     
  • ‘Thetford’ Aqua Kem Blue (2L)

    $24.00 Part no: DRV0212

    'Thetford' Aqua Kem Blue (2L)

    Aqua Kem Blue is a powerful and easy to use additive for waste holding tanks. It has a pine scent and can be used in Cassette Toilets as well as Porta Pottis.  It's a formula derived not only suppress unpleasant smells and reduce gas build-up, but also to break down solids and toilet tissue.  To use, simply pour 150ml into a 20LT waste tank.  Add 2-3ltr of water to ensure optimum performance.  Thetford recommends refreshing every 4-5 days.  
  • 'Thetford' Cassette Lip Seal (old type - pre June 2000)

    Through frequent use, with time or by accident parts of your toilet cassette might break. Instead of having to replace the whole cassette, simply replace the part that is broken. This is a replacement cassette lip seal for a Thetford toilet cassette pre June 2000. Benefits & Features
    • Replacement Cassette Lip Seal
    • Fits Thetford Toilet Cassettes (pre June 2000)
  • Thetford Porta Potti 565E

    The original and best portable toilet!
    Made from a light but tough plastic, these Porta Pottis are hermetically sealed (meaning that the seals are completely airtight, ensuring no unpleasant smells can escape!)  Cleaning is also made easy thanks to their detachable toilet seats.

    Product Description

    • Battery-powered electric flush
    • Sleek, modern and homelike design
    • Comfortable seat height
    • Large bowl
    • User-friendly Flush Lever
    • Tank Level Indicator for fresh water and waste tanks

    Specifications

    • Dimensions: 447H x 386W x 449D (mm)
    • Holding Tank Capacity: 20L
    • Flush Tank Capacity: 15L
    • Net Weight: 6Kg
  • 'Thetford' Replacement Control Panel for C400 Mk2 Toilet

    Through frequent use, with time or by accident parts of your toilet might break.  Instead of having to replace the whole thing, simply replace the part that is broken.  The Thetford Toilet C400 Control Panel MK2 is a replacement control panel for the Thetford C400 Toilet Cassette. Benefits & Features
    • Replacement MK2 control panel
    • Suits the Thetford C400 Toilet Cassette for the C400 Cassette Toilet
  • Replacement Glass Lid Only to suit Thetford Triangular 3 Burner Hobs. Please note this glass is BLACK.   Also in Stock we have:
    • Replacement Glass Lid T/S Caprice/Mini Grill Mk3 – please Click Here
    • Replacement Glass Lid T/S Triplex Mk3 – please Click Here
    • Replacement Glass Lid T/S – New K1500 Model (from 2020 onwards) – please Click Here
  • OUT OF STOCK - ETA on next shipment Early October '23.

    ________________________________________________________________________________________________________ Replacement Glass Lid Only to suit Thetford Aspire UK Models - See photo #2 for actual glass Dimensions:  490mm Wide x 425mm deep (front to back) Fits Oven/Grill Models with serial numbers starting with SCK 23- - - (Please see photos 3 & 4 showing where to find your ovens model number)   Also in Stock we have:
    • Replacement Glass Lid T/S Caprice/Mini Grill Mk3 - please Click Here
    • Replacement Glass Lid T/S Triplex Mk3 - please Click Here
    • Replacement Glass Lid T/S - New K1500 Model (from 2020 onwards) - please Click Here
         
  •   Replacement Glass Lid Only to suit Thetford Caprice (discontinued models) and Minigrill Mk3 Only Dimensions:  485mm Wide x 445mm deep (front to back) Fits Oven/Grill Models with serial numbers starting with SOH 72--- & SOH 73--- (Please see photos 3 & 4 showing where to find your ovens model number)     Also in Stock we have:
    • Replacement Glass Lid ASPIRE for UK Models - please Click Here
    • Replacement Glass Lid T/S Triplex Mk3 - please Click Here
    • Replacement Glass Lid T/S - New K1500 Model (from 2020 onwards) - please Click Here
         
  •   Replacement Glass Lid Only to suit Thetford NEW K1500 models (from 2020 onwards) Dimensions:  485mm Wide x 445mm deep (front to back) Fits Oven/Grill Models with serial numbers starting with SCK 42 --- & SCK 43 --- (Please see photos 3 & 4 showing where to find your ovens model number)     Also in Stock we have:
    • Replacement Glass Lid T/S Caprice/Mini Grill Mk3 – please Click Here
    • Replacement Glass Lid ASPIRE for UK Models - please Click Here
    • Replacement Glass Lid T/S Triplex Mk3 - please Click Here
         
  •   Replacement Glass Lid Only to suit most Thetford Triplex MK3 models Dimensions:  440mm Wide x 436mm deep (front to back) Fits Oven/Grill Models with serial numbers starting with SOH 70--- (Please see photos 4 & 5 showing where to find your ovens model number)     Also in Stock we have:
    • Replacement Glass Lid ASPIRE for UK Models - please Click Here
    • Replacement Glass Lid T/S Caprice/Mini Grill MK3 Models - please Click Here
    • Replacement Glass Lid T/S - New K1500 Model (from 2020 onwards) - please Click Here
         
  • Valterra RV Entrance Screen Door Handle (replacement part) to suit Philips Series Doors

    • Easy to replace
    • Exact replacement
    • Mulitple Colours
    For use with P Series screen door slides.  Exact replacement handle for Philip’s, Creation and other brands of screen doors similar in appearance. For more information & photos from the manufacturers site please CLICK HERE Colours Available:
    • White
    • Ivory
    • Black
    • Brown
    • Smoke
  • Valterra RV Entrance Screen Door Slide (replacement part)

    • Easy to replace
    • Exact replacement
    • No tools required
    • Mulitple Colours
    Types Available:
    1. 'E Series' - to suit Elixir Style Doors - 310H x 273W (mm) For more information & photos from the manufacturers site please CLICK HERE
    2. 'P Series' - to suit Philips Style Doors - 297H x 302W (mm) For more information & photos from the manufacturers site please CLICK HERE
    Colours Available:
    • Nu Tru White
    • Ivory
    • Black
    • Brown
    N.B. Matching handles are also available for 'P Series' screen doors - please CLICK HERE
  • ‘Ventline’ Roof Vent – 14”

    $139.00 Part no: DRV0012

    Currently OUT OF STOCK - Huge Supply Issues.  NO ETA on new stock.

    For a great alternative, please click HERE ___________________________________________________________________________________________________________________________

    'Ventline' Roof Vent – 14”

    Has strong galvanized steel roof flanges in a painted white finish.   It has a screw in mount, while the dome is styled with an aerodynamic shape in white polypropylene. Nicely finished with radius corners and comes in two removable pieces which is great  for cleaning.
    • Cut out hole 14” x 14”
    • Suit roof thickness 73mm – 100mm
    • White lid
  • 12v LED Marker Light – Type A

    $30.00 Part no: DRV0070
    12v LED Side Marker Light for USA RV & Caravans - Type A  (see also Type B)
    • Sold individually
    • Come with mounting screws.
  • 12v LED Marker Light – Type B

    $30.00 Part no: DRV0071
    12v LED Side Marker Light for USA RV & Caravans - Type B  (see also Type A)
    • Sold individually
    • Come with mounting screws.
  • Atwood to Suburban Water Heater Surround/Conversion Plate

    This aluminum surround has been designed and manufactured by us to bridge the gap when removing your old Atwood Water Heater and replacing it with the Suburban Equivalent. Dimensions (in mm)
    • 420W x 460H
    • 325W x 325H
    • 2.5mm thick
       
  • Dometic/Atwood Wall Thermostat

    $149.00 Part no: DRV0151

    Dometic/Atwood Wall Thermostat

    The Dometic Thermostat is a single-stage wall thermostat designed for temperature control of your furnace inside your RV.  Designed for 2-wire heating applications only. Atwood Part # 38453 For 12v DC, 24v AC, GAS and/or Oil Heaters Specifications:
    • Senses room temperature and automatically opens and closes circuits that send 12V DC to your furnace.
    • Mounts to the wall with (2) screws.
    • Temperature Range: 50-90-degrees F.
    • Mechanical readout.
    • It does not include fan control.
    • Color: White.
    • Dimensions: 3-1/8" x 3-1/8" 1-1/2" depth.
    • Weight: 0.2 lbs.
    • Limited 2-Year Manufacturer Warranty.
  • DRV Roof Vent - 400 x 400mm (4 Way Opening)

    • Cut out size: 400 x 400mm
    • 4 way roof vent.
    • 4 way tilt and full opening.
    • Removable fly screen.
    • Roller blind which slides across to block out unwanted light.
    • Spring assisted telescopic lifting mechanism.
    • Dome Size : 480 x 480mm
    • Height over roof: 91mm
    • Roof thickness: 42-70mm (although the inner surround can be cut down to cater for roof thicknesses under 42mm)
      This is the Larger of the 2 vents we have in this style.  The other size is smaller 280 x 280mm - it has no blind but does have a fly screen.  For this model please CLICK HERE NOTE:  Picture is showing the vent when fully up/open
  • DRV Roof Vent/Skylight - 400 x 400 (crystal) - with Blind, Flyscreen & Ambient Lighting!

    Features & Functions:
    • Aerodynamic Shape
    • Fast & firm lock & unlock structure
    • Anodized Aluminium push rod
    • Mood lighting (blue) with adjustable brightness (3 settings)
    • Double glazed, UV resistant dome
    • Pleated blind & flyscreen which conveniently lock together with magnets
    • Suitable for roof thicknesses: 28-50mm
    • Cut Hole Size: 400 x 400mm
    • Height Above Roof (when closed):  120mm
    • Height Above Roof (when fully open):  410mm
    • 3 different 'open' settings

    This vent is a great high quality, cost effective replacement or alternative to the Dometic Mini Heki Roof Vent!

  • DRV Roof Vent/Skylight - 700 x 500 (crystal) - with Blind, Flyscreen & LED Lights!

    Features & Functions:
    • Gas struts for easy operation
    • Manufactured from high quality, UV resistant materials & featuring a double glazed dome top
    • Maximum Opening Angle: 80°
    • Complete with pleated blind and flyscreen – which can be activated individually OR locked together by magnet and positioned as required (i.e. half and half)
    • LED Lights (12V) built into interior frame
    • Suitable for roof thicknesses: 25-60mm
    • Cut Hole Size: 500 x 700mm
    • Overall External Size: 645 x 835mm
    • 3 different 'open' settings

    This vent is a great high quality, cost effective replacement or alternative to the Dometic Midi Heki Roof Vent!

  • Sale!

    DRV Shower Box (white)

    Original price was: $149.00.Current price is: $130.00. Part no: DRV1012

    DRV Shower Box (white)

    This shower box is manufactured using high quality durable, UV resistant materials meaning it is suitable for external use. Features
    • Hot & Cold Taps with flexible hose & shower rose
    • Durable
    • Lockable
    • UV Resistant
    • Excellent Quality - we now use these in all of our top of the line Horse Float & Horse Truck Builds
    Dimensions:  325L x 197W x 133D (including water inlets) or 84D (excluding water inlets) - All measurements in mm    
  • DRV Turbo Vent (280 x 280)

    Features & Functions
    • Manufactured using high quality UV resistant materials
    • Complete with electric fan - doubles as a ventilator and extractor
    • Compact size - ideal for shower/bathroom areas (or anywhere where space is limited)
    • Manual Lid opening (maximum angle 50°)
    • Complete with flyscreen
    • Crystal/Clear Lid allowing light in even when the vent is closed
    • Cut Hole Size:  280 x 280mm
    • Overall Exterior Size:  358 x 363mm
    • Suitable for roof thicknesses 28-80mm
    A great quality product at an even better price!

Title

Go to Top