Water Filler/Inlet Hatch
- Made from UV Stabilized ASA
- Complete with lock & keys
- Extremely durable - both impact & UV resistant
- Colour: White
- Overall Dimensions Approx. 150W x 166H x 80D (measurements in mm) - See 5th photo for exact measurements
-
-
Small Plastic Service Locker/Hatch
Small plastic service hatch - great for fitting remote controls etc. Has a blank backing however this can be cut out if required.- Made from UV Stabilized ASA
- Complete with lock & keys
- Extremely durable - both impact & UV resistant
- Colour: White
- Overall Dimensions Approx: 193W x 165H x 60D (measurements in mm) - See 4th photo
-
Bostik 5612 - Non Skinning Butyl Mastic Sealant
Bostik Non Skinning Mastic (5612) is specifically formulated as a bedding or gasket style sealant. It remains in a soft plastic state providing a dust proof, weatherproof and flexible seal in a variety of construction and manufacturing materials.- Perfect for sealing roof vents
- Suitable for use on rubber roofs (EPDM etc)
-
Ventline - Replacement Lid to Suit New Style Plastic Clip Connection
- Replacement Plastic lid for New Style 2008 – present
- Ventline Wedge Dome
- 14” x 14” vent
- Colours Available: Smoke (tinted - NOT opaque Black as per the photo) or White
- The Original Ventline Vent Cover By: Dexter
- Plastic Hinge
- All Plastic Fittings
- Instructions for Replacement on the Package
- Come With: Dome/Plastic Slider Bar
- Doesn't Come with a Operator Arm or Center Bar
-
A replacement plastic lid for Ventline 14” x 14” vents. It is suited to fit the older style vents with a metal clip connection.
-
'Camco' Jensen Old Style Replacement Vent Lid - 40154 Replacement Plastic lid for Old style Jensen prior 1994 - Lid Assembly with Pin Hinge
- 14” x 14”
- 4 x Metal Hinge at the back
- White - Only
- UV-Stabilized
- Pre-Assembled
- Quick & Easy Installation
- Rust-Resistant, Galvanized Mounting Hardware
- Reinforced Center Bar for Added Strength & Stability
- Impact Resistant
- Instructions on the Box how to Fit etc
- Made in the USA
-
Replacement Vent Lid to suit JENSEN MK2 roof vent. Often described as Jensen New Style (1996 - Present) Take particular notice of the hinge style as we sell at least 5 different styles. Specifications:
- Size: 14” x 14”
- Colour: Black or White (please select your required colour from the drop down box)
- UV-Stabilized
- Pre-assembled
- Quick & Easy Installation
- Rust-Resistant, Galvanized Mounting Hardware
- Reinforced Center Bar for added Strength & Stability
- Impact Resistant
- Camco - Made in the USA
-
Replacement Lid for Old Style Elixir 14" x 14" Vent.
- Replacement plastic lid for OLD style Elixir prior 1994.
- Size: 14” x 14” vent.
- Colour: White
- Metal Tube-Like Hinge
- UV-Stabilized
- Pre-Assembled
- Quick & Easy Installation (On the Box how to Install)
- Rust-Resistant, Galvanized Mounting Hardware
- Reinforced Center Bar for Added Strength & Stability
- Made in the USA
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only. Please contact us with your requirements. Prices vary according to size, type & the varying exchange rates. Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
We can source a huge range of dome skylights out of the USA however these are by special order only.
- Prices vary according to size, type & the varying exchange rates.
- Please allow approximately 3 months from time of order.
-
4 Way Roof Vent - Square Features:
- Cut Out Size: 280mm x 280mm
- 24-7 Air flow (When Closed)
- The Lid is Double Skinned and has gap that air flow can flow thru 24/7 - So driving rain can come thru that on occasions (Has to be pretty drivng rain)
- Really Great for Horse Areas in Horse Trucks and Floats or Bathrooms areas that best suit 24/7 air Flow when Closed
- We would not recommend to use inside the Living of a Motor-home/Horse Truck/Caravan or Horse Float
- You can not see thru the Lid - White Plastic, so no direct Sunlight shines thru the lid
- 4 Way Opening Tilt
- Each Side and Front and Back Only
- Spring Assisted Telescopic lifting Mechanism.
- So If the weather is Bad you can have it open that the weather doesn't come in
- These Vents can be Driven with the lid up (Not like a lot of Vents)
- Fully Opens Up - Whole Lid.
- Removable Fly Screen - So you can open the vent up
- Made out off all Plastic Materials
- Picture is open up to the Front(Or Back or Each Side like this) Fully Open it whole top/Lid popped up
- These vents come in 2 Sizes - This Size and Larger size: 400mm x 400mm Roof thickness: 46 - 72mm
-
"Roof Breather Vent" For top of RV
- Plumbing Roof Vent
- Breather for your Fresh, Grey or Black Tanks
- 27/7 Breather
- This Vent is fitted to the roof of your Camper, Horse-Truck RV etc.
- This Vent allows complete air flow at all times.
- The Cap/Top can also be removed if needed.
- Made of good Quality Strong Plastic.
Dimensions:
Overall Flange Size: 135mm diameter Height: 80mm Fits over pipe up to 45mm Colour: Colonial White (Only) - Plumbing Roof Vent
-
DRV Turbo Vent (320 x 320)
Features & Functions- Modern Looking & aesthetically pleasing
- Manufactured using high quality UV resistant materials
- Complete with electric fan - doubles as a ventilator and extractor
- Doubles as extractor fan & interior lighting
- Manual Lid opening (maximum angle 50°)
- Complete with flyscreen & 4 LED lights (fan and lights on separate switches)
- White Lid
- Cut Hole Size: 320 x 320mm
- Overall Exterior Size: 398 x 403mm
- Suitable for roof thicknesses 28-80mm
-
DRV Turbo Vent (280 x 280)
Features & Functions- Manufactured using high quality UV resistant materials
- Complete with electric fan - doubles as a ventilator and extractor
- Compact size - ideal for shower/bathroom areas (or anywhere where space is limited)
- Manual Lid opening (maximum angle 50°)
- Complete with flyscreen
- Crystal/Clear Lid allowing light in even when the vent is closed
- Cut Hole Size: 280 x 280mm
- Overall Exterior Size: 358 x 363mm
- Suitable for roof thicknesses 28-80mm
-
DRV Roof Vent/Skylight - 700 x 500 (crystal) - with Blind, Flyscreen & LED Lights!
Features & Functions:- Gas struts for easy operation
- Manufactured from high quality, UV resistant materials & featuring a double glazed dome top
- Maximum Opening Angle: 80°
- Complete with pleated blind and flyscreen – which can be activated individually OR locked together by magnet and positioned as required (i.e. half and half)
- LED Lights (12V) built into interior frame
- Suitable for roof thicknesses: 25-60mm
- Cut Hole Size: 500 x 700mm
- Overall External Size: 645 x 835mm
- 3 different 'open' settings
This vent is a great high quality, cost effective replacement or alternative to the Dometic Midi Heki Roof Vent!
-
DRV Roof Vent/Skylight - 400 x 400 (crystal) - with Blind, Flyscreen & Ambient Lighting!
Features & Functions:- Aerodynamic Shape
- Fast & firm lock & unlock structure
- Anodized Aluminium push rod
- Mood lighting (blue) with adjustable brightness (3 settings)
- Double glazed, UV resistant dome
- Pleated blind & flyscreen which conveniently lock together with magnets
- Suitable for roof thicknesses: 28-50mm
- Cut Hole Size: 400 x 400mm
- Height Above Roof (when closed): 120mm
- Height Above Roof (when fully open): 410mm
- 3 different 'open' settings
This vent is a great high quality, cost effective replacement or alternative to the Dometic Mini Heki Roof Vent!
-
DRV Roof Vent - 400 x 400mm (4 Way Opening)
- Cut out size: 400 x 400mm
- 4 way roof vent.
- 4 way tilt and full opening.
- Removable fly screen.
- Roller blind which slides across to block out unwanted light.
- Spring assisted telescopic lifting mechanism.
- Dome Size : 480 x 480mm
- Height over roof: 91mm
- Roof thickness: 42-70mm (although the inner surround can be cut down to cater for roof thicknesses under 42mm)
